![Reply](https://www.dutchmenowners.org/forums/images/dutch/buttons/reply.gif) |
|
12-02-2013, 09:55 PM
|
#1
|
New Member
Join Date: Dec 2013
Location: Clovis
Posts: 9
California
|
2014 Voltage 3895 LED's
Hello Voltage Owners,
My wife and I just purchased a 2014 3895. Looking to upgrade the interior lighting to LED. Not looking to make changes to the mood lighting of the 3 hanging lights over the kitchen counter, but pretty much everywhere else. Does anyone know what type of LED and where to buy? I would also like to do the same to the exterior work lights, but don't know if the same interior LED would work. Anything you could assist with would be appreciated. Thank you in advance!!!
__________________
|
|
|
12-03-2013, 04:17 AM
|
#2
|
Member
Join Date: Dec 2012
Location: North Of Spokane
Posts: 39
Washington
|
If you can't find the info here, look on myvoltagerv.com. Tom has done this mod, and I plan too as well, when it thaws out. IIRC he lists the bulb #'s and where he purchased them.
__________________
__________________
2006 Ram 3500 SRW, Not Stock
2014 Dutchmen Voltage 3950 Epic II
LIFE IS WHAT HAPPENS WHILE YOU ARE MAKING PLANS FOR THE FUTURE.
|
|
|
12-03-2013, 03:54 PM
|
#3
|
Senior Member
Join Date: Oct 2013
Location: Little Rock
Posts: 157
Arkansas
|
__________________
Steve Brown https://SteveBrownMinistries.com
2014 Voltage 3950 w/Epic Pkg
2012 Chevy Crew Cab LTZ 4x4 DRW 3500hd Duramax
|
|
|
12-03-2013, 08:51 PM
|
#4
|
New Member
Join Date: Dec 2013
Location: Clovis
Posts: 9
California
|
Mike and slb5146,
Thank you both for the reply. I will check out myvoltagerv.com and have seen the G4 lights as well. The puck lights look pretty tough to pull out with the glass lenses. I will follow up if I can make the LED change and hopefully put up pics as well.
|
|
|
12-03-2013, 09:38 PM
|
#5
|
Senior Member
Join Date: Oct 2013
Location: Little Rock
Posts: 157
Arkansas
|
Quote:
Originally Posted by crobs9
The puck lights look pretty tough to pull out with the glass lenses.
|
It's really not that hard. Just take your finger tips and pull down on the fixture:
![](https://dl.dropboxusercontent.com/u/17838792/Puck%20Light/2013-12-03%2016.05.25.jpg)
Keep pulling down:
![](https://dl.dropboxusercontent.com/u/17838792/Puck%20Light/2013-12-03%2016.05.43.jpg)
Until you can grasp the fixture with you finger and thumb:
![](https://dl.dropboxusercontent.com/u/17838792/Puck%20Light/2013-12-03%2016.06.04.jpg)
Then unscrew the glass lenses.
If it would be easier keep pulling the fixture downward:
![](https://dl.dropboxusercontent.com/u/17838792/Puck%20Light/2013-12-03%2016.07.29.jpg)
Until the little spring clips pop out being careful that they don't snap you finger. It's like getting your finger in a mouse trap if that spring flips out on your finger:
![](https://dl.dropboxusercontent.com/u/17838792/Puck%20Light/2013-12-03%2016.08.01.jpg)
With the fixture completely out it should be an easy matter of pulling out the old bulb and plugging in the new LED.
__________________
Steve Brown https://SteveBrownMinistries.com
2014 Voltage 3950 w/Epic Pkg
2012 Chevy Crew Cab LTZ 4x4 DRW 3500hd Duramax
|
|
|
12-04-2013, 01:16 AM
|
#6
|
Senior Member
Join Date: Dec 2012
Location: Tahlequah
Posts: 3,079
Oklahoma
|
Try and keep your bare fingers off the Halogen lamps, they don't like body oils. Same as the LEDs, get some linen gloves to handle the lamps for a longer life.
__________________
2013 Voltage 3800, 2012 Chevy 3500 HD
2010 Yamaha V Star 950
2009 Yamaha Raider
Volunteering with Habitat for Humanity Caravanners
|
|
|
12-04-2013, 10:15 PM
|
#7
|
New Member
Join Date: Dec 2013
Location: Clovis
Posts: 9
California
|
Steve,
Wow...thank you for the picture detail and the assistance. Truly appreciated. I was afraid to pull down too hard on the lenses as they felt spring loaded and I did not want to snap them, but these pics sure did help. I will let you know how the MOD finished up!!
|
|
|
12-05-2013, 12:53 PM
|
#8
|
Senior Member
Join Date: Aug 2013
Location: Sanger
Posts: 258
Texas
|
How do these lights compare to the halogens in terms of brightness?
I'm also wondering what the "wedge base lights" are?
__________________
2013 Voltage 3200
2014 Ford F350 DRW
www.facebook.com/VoltageToyHauler
|
|
|
12-05-2013, 10:41 PM
|
#9
|
Senior Member
Join Date: Oct 2013
Location: Little Rock
Posts: 157
Arkansas
|
Quote:
Originally Posted by soonernation
How do these lights compare to the halogens in terms of brightness?
I'm also wondering what the "wedge base lights" are?
|
We brought the 5050 LEDs because they are brighter. I think they put out about the same amount of light as the halogens. I don't know about the lumens for the halogen but the LED is 360 Lumens.
Here is what the Wedge Base LEDs look like:
__________________
Steve Brown https://SteveBrownMinistries.com
2014 Voltage 3950 w/Epic Pkg
2012 Chevy Crew Cab LTZ 4x4 DRW 3500hd Duramax
|
|
|
12-07-2013, 02:32 AM
|
#10
|
Senior Member
Join Date: Nov 2013
Location: Quartzsite
Posts: 682
Arizona
|
I changed out all of the lights in my Voltage 3905 except for the pantry light and the steps. I didn't even know they were there for a couple of weeks. I find that they are not as bright as the original lights but are bright enough. And they use almost no electricity. Seriously. I have an inverter control panel that shows me how many amps are being used. I don't remember the exact number but it was something like this. With all the original bulbs turned on I was drawing in the neighborhood of 60 amps. With the LED's all turned on I am drawing less than 2 amps.
The photos that slb5146 put here are helpful, but be careful when removing those lenses. I let one of the first ones I changed slip and it hit the bathroom vanity and broke. I how have a few spare lenses I purchased and will most likely never use. I found that the recessed lights in the area that are plywood would not pull down far enough to get a hold of. So I inserted a screwdriver blade to keep them from turning in place. I also decided it was safer to use a piece of duct tape doubled over and placed on the lens when removing. Saved me a lot of fumbling with them. I just gives you something to get a grip on if the lens tries to get away from you.
This was not a 20 minute light bulb changing project for me. I am getting on in years and it took me a good day to do the job. The one above the steps leading into the bedroom was a bitch to get to.
Also, I found that the warm white color is much more appealing than the cool white. Personal preference I suppose, but the cool white has than blue appearance.
Home Depot and Wal-mart have some nice battery operated LED lights for other areas. Under the kitchen sink, closets etc. I have them everywhere, almost.
|
|
|
12-07-2013, 03:04 AM
|
#11
|
Senior Member
Join Date: Dec 2012
Location: Tahlequah
Posts: 3,079
Oklahoma
|
I'm thinking you must have had nearly 60 10 watt 12 volt Halogen lamps burning to draw 60 amps.
Ohm's Law tells me a 10 watt lamp at 12 volts draws a tad over .8 amps, not even one amp.
Conversely, working the other way, 60 amps at 12 volts would be 720 watts of power made. Given an estimate of 35 puck lights in the rigs each one would be 20 watt lamps.
It seems as if you had more consumption going on than just the estimated Halogen lamps unless they were 20 watts lamps. All but four of mine were 10 watt lamps but 95% of my Halogens have been replaced with 10 watt LEDs.
The 2 amp draw from the LEDs is a reasonable number however.
__________________
2013 Voltage 3800, 2012 Chevy 3500 HD
2010 Yamaha V Star 950
2009 Yamaha Raider
Volunteering with Habitat for Humanity Caravanners
|
|
|
12-07-2013, 03:42 AM
|
#12
|
Senior Member
Join Date: Nov 2013
Location: Quartzsite
Posts: 682
Arizona
|
Quote:
Originally Posted by sundancer 87
I'm thinking you must have had nearly 60 10 watt 12 volt Halogen lamps burning to draw 60 amps.
Ohm's Law tells me a 10 watt lamp at 12 volts draws a tad over .8 amps, not even one amp.
Conversely, working the other way, 60 amps at 12 volts would be 720 watts of power made. Given an estimate of 35 puck lights in the rigs each one would be 20 watt lamps.
It seems as if you had more consumption going on than just the estimated Halogen lamps unless they were 20 watts lamps. All but four of mine were 10 watt lamps but 95% of my Halogens have been replaced with 10 watt LEDs.
The 2 amp draw from the LEDs is a reasonable number however.
|
I can go through and count all the different lights, there are a bunch of them. And in my 60 amp draw I am counting all the larger draw exterior work lights.
All in all I am extremely happy with my LED lights. I can light the rig up like a white Christmas tree and go visit neighbors. Hard to miss it in a large flock of campers.
|
|
|
12-07-2013, 04:47 AM
|
#13
|
Senior Member
Join Date: Oct 2013
Location: Little Rock
Posts: 157
Arkansas
|
Quote:
Originally Posted by arlan in arizona
I find that they are not as bright as the original lights but are bright enough.
|
I am curious about the type LED that you used. Where did you get them? Could you provide a Link if you ordered them online? Do your LED's use the 5050 LED Chips? The 5050's are brighter than some of the cheaper LED's.
__________________
Steve Brown https://SteveBrownMinistries.com
2014 Voltage 3950 w/Epic Pkg
2012 Chevy Crew Cab LTZ 4x4 DRW 3500hd Duramax
|
|
|
12-07-2013, 09:56 PM
|
#15
|
New Member
Join Date: Dec 2013
Location: Clovis
Posts: 9
California
|
Arlan,
I appreciate all the follow up. I ordered the cool white lights 5050. I am hoping that they do not emit too much blue, but thought they were much brighter than the warm white lights that I looked at.
I do not plan on changing the hanging mood lights over the counter. Have you changed out the lights in the corner of the pop-out that are push button on?
|
|
|
12-08-2013, 01:32 AM
|
#16
|
Senior Member
Join Date: Nov 2013
Location: Quartzsite
Posts: 682
Arizona
|
Quote:
Originally Posted by crobs9
Have you changed out the lights in the corner of the pop-out that are push button on?
|
I don't understand the question.
|
|
|
12-08-2013, 02:55 PM
|
#17
|
New Member
Join Date: Dec 2013
Location: Clovis
Posts: 9
California
|
I will try and send over a pic
|
|
|
12-08-2013, 04:40 PM
|
#18
|
Senior Member
Join Date: Nov 2012
Location: Las Vegas
Posts: 600
Nevada
|
Arlin: I think he is talking the Sconce lights above couch.
__________________
![](/attachments/signaturepics/sigpic442_1.gif)
2017 Dodge Ram 3500 DRW
2014 Voltage 3200
2005 FLHTCI
|
|
|
12-08-2013, 08:34 PM
|
#19
|
Senior Member
Join Date: Oct 2013
Location: Little Rock
Posts: 157
Arkansas
|
Quote:
Originally Posted by crobs9
Have you changed out the lights in the corner of the pop-out that are push button on?
|
I think you are referring to the corner lights in the Living Room Slide-out. I did change out the halogen bulbs to the 5050 Warm White Wedge type LED's.
I also installed a pull-chain for the five overhead puck lights in the slide-out. We didn't like the overhead lights on all the time but wanted the little corner lights on most of the time. We could not do that without the pull-chain because they were all wired together on one rocker switch in the control center. Here is a picture to try to illustrate my pull-chain addition.
I just drilled a small hole for the pull-chain cord and placed the switch above the small hole. All 5 of the puck lights were wired from that one puck light so the switch controls all 5 puck lights. We don't use those puck lights very often so the pull-chain is used very little.
__________________
Steve Brown https://SteveBrownMinistries.com
2014 Voltage 3950 w/Epic Pkg
2012 Chevy Crew Cab LTZ 4x4 DRW 3500hd Duramax
|
|
|
12-08-2013, 09:00 PM
|
#20
|
Senior Member
Join Date: Nov 2013
Location: Quartzsite
Posts: 682
Arizona
|
Quote:
Originally Posted by slb5146
I think you are referring to the corner lights in the Living Room Slide-out. I did change out the halogen bulbs to the 5050 Warm White Wedge type LED's.
I also installed a pull-chain for the five overhead puck lights in the slide-out. We didn't like the overhead lights on all the time but wanted the little corner lights on most of the time. We could not do that without the pull-chain because they were all wired together on one rocker switch in the control center. Here is a picture to try to illustrate my pull-chain addition.
I just drilled a small hole for the pull-chain cord and placed the switch above the small hole. All 5 of the puck lights were wired from that one puck light so the switch controls all 5 puck lights. We don't use those puck lights very often so the pull-chain is used very little.
|
I see what crobs9 was referring to now. My 3905 does not have those (push button) lights. Instead I have more glass. I would rather have the lights. Looking at the wall space in the photo, I think my slide may be wider but I don't know that for a fact. I find a lot of heat is transferred into the coach through all of that glass. I am looking into window awnings right now. I actually have to consider at what angle I park as not to get a bunch of sunshine coming though those windows.
__________________
|
|
|
![Reply](https://www.dutchmenowners.org/forums/images/dutch/buttons/reply.gif) |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|