Aerolite 2423bh water tank

[Jeffpocorena]

I have a 2018 aeroliet 2423 bh and my feed line from my water pump seems to have a kink or clog or is sucking air. Not getting good flow of water . What is the best way to drop or access the water tank. Rig has a fully enclosed belly so not sure the best way to go.about it. Any hints or trick would be great. Thank you

[persistent]

If it is sucking a little air, the flow from the faucet will probably spurt and spray in pulses as the air passes through.

If it is kinked, flow will be slow but smooth.

In both cases, the kink or hole or loose connector in the suction line can be above the floor. I would carefully examine tubing leading to the pump first.

Many threaded connectors need to be hand tight. Gaskets must be in proper position.

Some installations have a valve and a second suction line for sucking antifreeze into the system. If the valve is miss set, it will only suck air.

My Kodiak Cub had kinks in the flexible tubing near where it came out of the floor. Cutting the tube and inserting 90 degree and 45 degree fittings relieved the kinks.