Quote:
Originally Posted by Aronious
Ok! this is a visual walk through of extending the support legs on our 2012 Voltage 3905, shut your eyes and visualize the following,..
|
Aronious... thanks for the walkthrough. I just know I wouldn't have figured the whole thing out without it.
When this thread popped up, i remembered seeing something on mine that was like what was being described, but I was in a site for a few days where dropping the rear deck wasn't really practicable.
After I pulled into my new site today, I had opportunity to investigate and take some photos.
With the rear awning extended, here is the left side brace-leg as it sits in the retainer:
The next picture here shows the right side brace extended out of the retainer:
This next photo shows where the clip is located on the ramp floor:
This is the orange lever that needs to be flipped open to extend the brace fully:
At this point, set one end of the 'wing' on the end of the brace under the solid bar on the clip as such...
...and then you move the silver pin over the other 'wing' to secure it (in this case, the silver pin moves to the right):
When done, it will look like this:
Hope these pictures help. Thanks again to all for the thread, because without it, I wouldn't have even known these braces existed.
__________________