|
11-29-2015, 11:10 PM
|
#1
|
Senior Member
Join Date: May 2013
Location: Cody
Posts: 1,764
Wyoming
|
Ceiling Fan - Researching Ideas
I think my next major modification is going to be installing a ceiling fan in my main room... just not exactly sure how I'm going to do it.
We all know ceiling fans in homes work extremely well at cooling a room, and work equally as well redistributing warm air that rises to the ceiling in cooler weather. I think doing the same in my rig would lower my electrical costs in summer when I'm on the RV park meter... and also my propane costs in winter.
I've seen ceiling fans in RVs before, so it's not a new concept. The issue, of course, is how & where to locate it so that it is sturdy, able to pick up 12v power easily, and most importantly... installed in such a way so as to not interfere with the slideout.
Since my 3200 model rig is pretty compact, I've got my location picked out pretty much dead center over my kitchen & sitting area. There's a stud almost perfectly placed that I can hang it on, and I'm pretty sure I can either tap power from one of the puck lights, or snake a separate wire above the ceiling to the control panel. The larger issue is making sure the slideout will clear it. In my rig, the top of the slideout is only 9" below the ceiling.
On that I have 2 thoughts...
Option 1:
A ceiling fan works great at moving & redistributing the air, but only if there is sufficient amount of space between the ceiling and the blades. You need at least 6" for a short-blade fan to be effective (36" fan), and more fir a longer-blade model.
Camping World sells a fan with a 5˝" total depth... which is good for clearing the slideout, but which I think will be ineffective at helping cool or heat the room. I know that you can buy lowering rods... but as I'm looking for at least a 42" fan, I'm not sure even getting the blades 8" away from the ceiling would be sufficient.
Option 2:
Ideally, the slideout issue would never come into play... so what if I could eliminate it? That is... can I devise a 'breakaway' mounting plate that would allow me to easily install & remove the unit?
That's something I need to study & research more carefully... but if anyone's got any ideas, I'm all ears.
So, what do you all think? Has anyone done this already, and have any tips? Or anyone have ideas and/or points to think about that I may not have thought of?
__________________
__________________
Tom
2013 VOLTAGE 3200 (EPIC I & II)
2014 Ford F-450 PLATINUM
2018 BMW R1200GS RALLYE
|
|
|
11-29-2015, 11:51 PM
|
#2
|
Site Team
Join Date: Jun 2014
Location: Sprung Leak
Posts: 3,157
North Carolina
|
I have only seen ceiling fans installed in $500,000 buses.
The only problems I can see with installing and removing when traveling is not damaging it and having to get up there to get it down. I have moved ceiling fans from one house to another, just about every one ended up with bent blades. Admittedly those were the larger 52" fans and we should have taken the blades off the fans to transport them.
Aaron
__________________
__________________
There is madness to my methods
2015 Coleman CM16FBS(traded) 2016 Concord 300DS
2015 Ford Fusion Hybrid following along
|
|
|
11-30-2015, 12:12 AM
|
#3
|
Senior Member
Join Date: May 2013
Location: Cody
Posts: 1,764
Wyoming
|
Yeah Aaron... true. I was thinking of a slide-on / slide-off type of mounting plate, and getting to it would only require me standing on a folding chair. But not damaging the blades is a definite concern, as they'd be a PITA to remove & install each time.
Hmmm... yeah, good call.
That said, I have seen ceiling fans in 5th wheel toyhaulers. I can't remember whether it was XLR models by Forest River, or Raptor models by Keystone... but one of them used to come equipped with a ceiling fan from the factory. So it obviously can be done.
__________________
Tom
2013 VOLTAGE 3200 (EPIC I & II)
2014 Ford F-450 PLATINUM
2018 BMW R1200GS RALLYE
|
|
|
11-30-2015, 02:01 AM
|
#4
|
Senior Member
Join Date: Nov 2014
Location: Youngstown
Posts: 712
Florida
|
We had one in our last 5'er a Dutchmen Denali 360QMB. It was a ceiling hugger type that the blades were less than 6" off of the ceiling. It was very effective in our bedroom area. I think it was about 36" model. It cleared the bedroom slide without issue.
I believe the option of finding a mounting stud and power is the only minor issue, the short fan works well. Install and leave it.
|
|
|
11-30-2015, 08:00 AM
|
#5
|
Senior Member
Join Date: Aug 2013
Location: Memphis
Posts: 1,616
Michigan
|
My father in law has one in his Suites fifth wheel. A down rod isn't a good idea due the possibility of it swinging and hard bump in the rod dislodging it from the socket. His is mounted inside a recess in the ceiling in order to clear his slides and also is a ceiling mount model. While that may not meet the distance you are looking for from the ceiling, it does still move air.
__________________
2019 Ram 3500 Limited w/ Max Tow pkg
2005 Cardinal 33LX
2014-3950, Full Paint, 17.5" tires, 370W solar, 3100W Magnum inverter w/ AGS, 7500w diesel generator, Micro-Air Easy Start 364 (x3) SOLD!
|
|
|
11-30-2015, 04:08 PM
|
#6
|
Senior Member
Join Date: Mar 2014
Location: Desert Hot Springs
Posts: 1,761
California
|
Thom
My Teton came with one. Being OEM it was 120v. 42" that cleared both slides by maybe a inch when closed.
They make 36" 12v ones you can get online. Here is just one option.
http://www.amazon.com/Global-Electri...rds=12v+rv+fan
__________________
Mike
2002 42' Monaco Signature Triple Crown tow 2014 F-150
2014 Voltage V3605 Sold 5/3/17
2012 F-350 6.7l CC 4X4, Sold 10/10/17
|
|
|
01-18-2016, 02:51 PM
|
#7
|
New Member
Join Date: Dec 2015
Location: Midland
Posts: 8
Texas
|
ATCguy, did you end up installing a ceiling fan? Would love to have on in my 3200 as well. I looked at a XLR Thunderbolt before I bought mine and the ceiling fan in it moved a lot of air. If you did, I would love to know how you did it. Thanks
|
|
|
01-18-2016, 04:23 PM
|
#8
|
Senior Member
Join Date: May 2013
Location: Cody
Posts: 1,764
Wyoming
|
Not yet... as the temps cooled down here, that project got moved to the back burner. Haven't forgot about it though.
__________________
Tom
2013 VOLTAGE 3200 (EPIC I & II)
2014 Ford F-450 PLATINUM
2018 BMW R1200GS RALLYE
|
|
|
01-19-2016, 05:22 PM
|
#9
|
Senior Member
Join Date: Dec 2014
Location: Minden
Posts: 708
Nevada
|
Tom, My Montana had one and it worked very well, I know you don't move around to much, but I think if you can make it, so you don't have to remove it, would be better, but if you decide to remove it, after you wired it for the first time, you can make wire disconnects easy, and if you use a small drop down rod, you may just be able to unscrew the rod and remove the Fan?
Rich
__________________
Rich and Angela, Lab Dogs, Ruben, Ace
2015 Voltage V3895
2006 Lance Truck Camper 1181
2019 GMC 3500HD 4X4 CC DRW LB Bags Husky 26K Hitch Can Am Commander 1000 ATV
|
|
|
01-20-2016, 10:17 PM
|
#10
|
Senior Member
Join Date: Sep 2015
Location: Lenoir
Posts: 130
North Carolina
|
MAXXFAN Deluxe
try this. not too sure how new this product is. but the max air fan has been around a long time. the "deluxe" will move air up- or down. WITH the hatch open or closed. can also set it to come on for temperature
https://youtu.be/9AHfFl-vNGk
|
|
|
01-20-2016, 10:37 PM
|
#11
|
Senior Member
Join Date: Mar 2014
Location: Desert Hot Springs
Posts: 1,761
California
|
Quote:
Originally Posted by hopkins44
MAXXFAN Deluxe
try this. not too sure how new this product is. but the max air fan has been around a long time. the "deluxe" will move air up- or down. WITH the hatch open or closed. can also set it to come on for temperature
https://youtu.be/9AHfFl-vNGk
|
Tom I think is looking for a 120v fan. I have the Maxxfan in my garage which does work great. Also have it in my Teton.
__________________
Mike
2002 42' Monaco Signature Triple Crown tow 2014 F-150
2014 Voltage V3605 Sold 5/3/17
2012 F-350 6.7l CC 4X4, Sold 10/10/17
|
|
|
01-20-2016, 11:41 PM
|
#12
|
Senior Member
Join Date: May 2013
Location: Cody
Posts: 1,764
Wyoming
|
Yeah, I've got 3 of those fans in my rig... but I'm taking about a residential type ceiling fan, that I can use to circulate air inside the rig without those 'exhaust' type fans being open to the outside.
__________________
Tom
2013 VOLTAGE 3200 (EPIC I & II)
2014 Ford F-450 PLATINUM
2018 BMW R1200GS RALLYE
|
|
|
01-22-2016, 05:23 AM
|
#13
|
Senior Member
Join Date: Nov 2013
Location: Bakersfield
Posts: 75
California
|
Our Weekend Warrior full throttle had a small ceiling fan in the living room area. It really did a good job of moving the air around.
__________________
__________________
2014 Voltage 3895 Epic with all weather package.
Full Body Paint
2018 F450 4x4 DRW
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|