My shock mounts were a little out of alignment (surprise!) so each side was slightly different by 1-2 washers. Just make sure the shocks aren't touching each other but as close as possible.
__________________
__________________
2017 Voltage 3970, Epic, Full Paint
2015 Ford F350 DRW CC 4X4
2016 Kawasaki Teryx 4
4 grandkids, 1 Yellow Lab, 1 Kubota Tractor
Just completed the modification. We traveled a couple thousand miles last month, and the bucking was starting to wear me down. Looking forward to seeing how it is over the next couple thousand miles next month!
So now we have the info on the shocks...but what about the rest of the hardware needed...and yup...this post would be a whole lot better with some pics...
Mine is similar but you will need to add or remove the washers to get the shocks in alignment. I added no washers on top but had to add 6 washers to the left side shock to get it aligned and added 1 washer to the right side.
__________________
2017 Voltage 3970, Epic, Full Paint
2015 Ford F350 DRW CC 4X4
2016 Kawasaki Teryx 4
4 grandkids, 1 Yellow Lab, 1 Kubota Tractor
Mine is similar but you will need to add or remove the washers to get the shocks in alignment. I added no washers on top but had to add 6 washers to the left side shock to get it aligned and added 1 washer to the right side.
Just completed the modification. We traveled a couple thousand miles last month, and the bucking was starting to wear me down. Looking forward to seeing how it is over the next couple thousand miles next month!
Went 400 miles yesterday and there most definitely is an improvement! Only had one notable bump, but it was not as severe.