Quote:
Originally Posted by Shemp
buddy306,
Your plan qon't work. With the Wineguard plug in place (Yes the cable input goes though it) it will block the Sat signal to the receiver. And each TV will require a Sat receiver to go to the TV. I'd install a new outside coax plug for the Sat. It's cheap and easy. If the TVs are watching the same channel, there are many wireless systems that will repeat the outbound sat to all of the TV. The big disadvange is that all TVs must watch the same channel.
|
Why wouldn't it work. The connection on the outside of the RV says cable/satellite. When I did my delivery walk thru the dealer told me that the satellite would connect there and that the power booster at the plate inside had to be off. I just dont understand how all these cables tie together or how to access them. I have an antenna on the top that obviously goes to the plate with the booster in the main salon area then I have a sat/cable input and then theres the separate coax from the bedroom. This thing must have quite a few 2 to 1 combiners. Any idea where I could get a coax wiring schematic for my model?
__________________