|
|
07-08-2015, 12:56 AM
|
#1
|
Senior Member
Join Date: Jan 2015
Location: Roselle
Posts: 1,292
Illinois
|
EGT Gauge Installation
Upon reading what was posted on the Forum as well as the internet, I think I want to have an EGT system installed. However, I'm not as handy as many of you, and after reading the installation process (drilling into the manifold and what can happen if shavings fall thru), I want to have it done. I have a 2015 F-350 diesel dually and is almost brand new, so I don't want to jeopardize the warranty. Is this something the dealer can do? if not, what kind of shop, as well as what kind of cost am I looking at? Thanks,
Rusty
__________________
__________________
2015 Black F-350 Platinum Diesel Dually Crew Cab
2019 Riverstone Legacy 38MB (Full Paint/All Options)
2015 Voltage 3990 (Full Paint, All Options) Sold 6/18
2005 Harley Ultra Classic w/too many miles
|
|
|
07-08-2015, 03:44 AM
|
#2
|
Senior Member
Join Date: Dec 2014
Location: Elko
Posts: 52
Nevada
|
I've done quite a few of them. Just use grease on the drill bit and tap. Also, do it with the engine running, it blows the chips right out. Who was that guy on tv that said "you can dooo itt"
__________________
__________________
Ram 3500 DRW, 15' 3805 09 Electra-Glide, Therapy Bike, 79 Electra-Glide, Bar Hopper
Earth first, we'll mine the other planets later.
|
|
|
07-08-2015, 08:07 AM
|
#3
|
Senior Member
Join Date: Aug 2013
Location: Memphis
Posts: 1,616
Michigan
|
^^^ x2. Very easy
Diesel manor sells a nice gage and will provide the premade harness for you if you like. I got my triple stack gages from them with premade harness.
__________________
2019 Ram 3500 Limited w/ Max Tow pkg
2005 Cardinal 33LX
2014-3950, Full Paint, 17.5" tires, 370W solar, 3100W Magnum inverter w/ AGS, 7500w diesel generator, Micro-Air Easy Start 364 (x3) SOLD!
|
|
|
07-08-2015, 12:39 PM
|
#4
|
Senior Member
Join Date: Dec 2012
Location: Tahlequah
Posts: 3,079
Oklahoma
|
__________________
2013 Voltage 3800, 2012 Chevy 3500 HD
2010 Yamaha V Star 950
2009 Yamaha Raider
Volunteering with Habitat for Humanity Caravanners
|
|
|
07-08-2015, 02:18 PM
|
#5
|
Senior Member
Join Date: Sep 2014
Location: Callaway
Posts: 864
Maryland
|
STOP!!!!
You have a 2015 F350....you have 4 EGT probes already installed....look into an Edge CTS, it is not a tuner, but plugs into the OBD port... You can monitor a whole crap ton of information, plus you have a no kidding visual of when a regeneration cycle is actually occurring.
I currently monitor all 4 EGT sensors, coolant temp, transmission temp, DPF load, boost pressure, DEF %, amongst others. When regenerating, there is a flashing red R at the top of the screen...
Cale
__________________
TV: 2015 F-350 DRW, CC, 4x4, with 14k GVWR package, 98 gallon TransferFlow Aux Tank, Timbren Shocks
TH: 2014 Voltage 3950, Sailun S637 all around
|
|
|
07-08-2015, 02:29 PM
|
#6
|
Senior Member
Join Date: Jan 2015
Location: Roselle
Posts: 1,292
Illinois
|
Thanks Cale. Follow-up question. When I scroll thru all my fields and dash gauges, I see the turbo boost gauge, DEF level, coolant temperature, and transmission temperature. Don't know what "DPF Load" is (told you I'm not the sharpest knife in the drawer), but I don't see a reading or gauge for EGT. Am I missing it or do I need to add something. Thanks, and have a safe trip!
Rusty
__________________
2015 Black F-350 Platinum Diesel Dually Crew Cab
2019 Riverstone Legacy 38MB (Full Paint/All Options)
2015 Voltage 3990 (Full Paint, All Options) Sold 6/18
2005 Harley Ultra Classic w/too many miles
|
|
|
07-08-2015, 02:31 PM
|
#7
|
Senior Member
Join Date: Jan 2015
Location: Roselle
Posts: 1,292
Illinois
|
Disregard. Re-read your information. I'll look into the CTS Programmer. Thanks again.
Rusty
__________________
2015 Black F-350 Platinum Diesel Dually Crew Cab
2019 Riverstone Legacy 38MB (Full Paint/All Options)
2015 Voltage 3990 (Full Paint, All Options) Sold 6/18
2005 Harley Ultra Classic w/too many miles
|
|
|
07-08-2015, 02:44 PM
|
#8
|
Senior Member
Join Date: Sep 2014
Location: Callaway
Posts: 864
Maryland
|
Quote:
Originally Posted by lcv800
Thanks Cale. Follow-up question. When I scroll thru all my fields and dash gauges, I see the turbo boost gauge, DEF level, coolant temperature, and transmission temperature. Don't know what "DPF Load" is (told you I'm not the sharpest knife in the drawer), but I don't see a reading or gauge for EGT. Am I missing it or do I need to add something. Thanks, and have a safe trip!
Rusty
|
Their web site is edge products.com
They do sell programmers, but I use only the CTS monitor. I currently use the original CTS, now they have a CTS 2, which looks to be somewhat nicer...
I used this same one when I had my Duramax, I did install an EGT probe, which I monitored with this also...there are all kinds of doo-dads that can be added, such as a turbo cool off timer....
As far as the probes installed, they are all post turbo, 1 is pre DOC (Diesel Oxydation Catalyst), 2 is pre SCR (Selective Catalyst Reduction), and 3 and 4 being pre and post DPF...
Granted, none of these are in the manifold, but the information is still good...these were the sensors that were failing and leaving folks stranded on the Gen 1 6.7.
The CTS can also read/reset codes if needed.
Cale
__________________
TV: 2015 F-350 DRW, CC, 4x4, with 14k GVWR package, 98 gallon TransferFlow Aux Tank, Timbren Shocks
TH: 2014 Voltage 3950, Sailun S637 all around
|
|
|
07-08-2015, 04:21 PM
|
#9
|
Senior Member
Join Date: Aug 2013
Location: Memphis
Posts: 1,616
Michigan
|
Not to hijack - post turbo temp is important for properly cooling down after towing, but you really need to monitor pre-turbo EGT to avoid smoking the turbo and it's bearings...you'll actually find yourself starting to use this EGT for shift points more than you ever will for RPM again. It's that important.
__________________
2019 Ram 3500 Limited w/ Max Tow pkg
2005 Cardinal 33LX
2014-3950, Full Paint, 17.5" tires, 370W solar, 3100W Magnum inverter w/ AGS, 7500w diesel generator, Micro-Air Easy Start 364 (x3) SOLD!
|
|
|
07-08-2015, 04:26 PM
|
#10
|
Senior Member
Join Date: Sep 2014
Location: Callaway
Posts: 864
Maryland
|
Don,
Completely agree with that, as that is exactly how I drove my 2005 Duramax. I installed a manifold EGT sensor and monitored with the CTS...I have not bothered with this truck as I think it is hard to get the temps up to the point of torpedoing one of these new turbos. The 2015 6.7 turbo is 33% larger than 1st Gen 6.7. Moves a lot more air. My first EGT rarely breaks into the low 800s except when running a regen....
Cale
__________________
TV: 2015 F-350 DRW, CC, 4x4, with 14k GVWR package, 98 gallon TransferFlow Aux Tank, Timbren Shocks
TH: 2014 Voltage 3950, Sailun S637 all around
|
|
|
07-08-2015, 04:33 PM
|
#11
|
Senior Member
Join Date: Aug 2013
Location: Memphis
Posts: 1,616
Michigan
|
I tend to run mine a little harder than some. I have a few mods and software so when towing and rowing thru the gears it is not usual to see 1200-1300 for short periods until at cruising speed where I then settle into 700-900 range. Certainly agree with you on newer VGT turbos but I refuse to run the newer ones as they are so choked by our friends at the EPA. My '05 5.9 Cummins pulls circles around some of the newer trucks plus I have no CAT with no codes due to no sensors. Don't get me wrong, I love the newer diesels too but I like to tweak on mine to much and that doesn't play well with CO2 stuff.
__________________
2019 Ram 3500 Limited w/ Max Tow pkg
2005 Cardinal 33LX
2014-3950, Full Paint, 17.5" tires, 370W solar, 3100W Magnum inverter w/ AGS, 7500w diesel generator, Micro-Air Easy Start 364 (x3) SOLD!
|
|
|
07-08-2015, 09:36 PM
|
#12
|
Senior Member
Join Date: May 2014
Location: Peyton
Posts: 96
Colorado
|
I agree, really no need to tap the manifold if you're running a stock truck. They have been engineered to not get to a point of catasprophic failure. If they do get to that point there is another issue. And time you add for fuel or timing then it is certainly worth having pre turbo EGT's
__________________
2014 Voltage V3605
2021 Ram 3500 CCLB DRW
|
|
|
07-08-2015, 09:42 PM
|
#13
|
Senior Member
Join Date: Aug 2013
Location: Memphis
Posts: 1,616
Michigan
|
Yep. But I added fuel with a box, wicked diesel inferno, injectors, etc...so when you start running mods it's insurance
__________________
2019 Ram 3500 Limited w/ Max Tow pkg
2005 Cardinal 33LX
2014-3950, Full Paint, 17.5" tires, 370W solar, 3100W Magnum inverter w/ AGS, 7500w diesel generator, Micro-Air Easy Start 364 (x3) SOLD!
|
|
|
07-08-2015, 09:50 PM
|
#14
|
Senior Member
Join Date: May 2014
Location: Peyton
Posts: 96
Colorado
|
Absolutely.
__________________
2014 Voltage V3605
2021 Ram 3500 CCLB DRW
|
|
|
07-09-2015, 03:39 PM
|
#15
|
Senior Member
Join Date: Sep 2014
Location: Callaway
Posts: 864
Maryland
|
Quote:
Originally Posted by donzinger
I tend to run mine a little harder than some. I have a few mods and software so when towing and rowing thru the gears it is not usual to see 1200-1300 for short periods until at cruising speed where I then settle into 700-900 range. Certainly agree with you on newer VGT turbos but I refuse to run the newer ones as they are so choked by our friends at the EPA. My '05 5.9 Cummins pulls circles around some of the newer trucks plus I have no CAT with no codes due to no sensors. Don't get me wrong, I love the newer diesels too but I like to tweak on mine to much and that doesn't play well with CO2 stuff.
|
I bet your truck pulls like a raped ape! I ran EFI Live through my Edge CTS on my Duramax...it was an awesome setup for sure. If I had kept the truck, I would have needed to upgrade the Alison in it. We would be on long grades pulling up hill, it would slip and go into limp mode...
I have read about folks with the Ford 6.7 successfully removing DEF, DPF, and all the rest successfully for about $2,500... May be an option in the future, but until I am done moving around, I will just stay put.
When I first got to CA, we were still using DOD decals to get on base, part of that process was in CA was to get your vehicle smog checked...some kind of agreement with CA, guess what, mine did not pass, , I just waited until we did away with those before I started driving on base again.
Cale
__________________
TV: 2015 F-350 DRW, CC, 4x4, with 14k GVWR package, 98 gallon TransferFlow Aux Tank, Timbren Shocks
TH: 2014 Voltage 3950, Sailun S637 all around
|
|
|
07-09-2015, 03:40 PM
|
#16
|
Senior Member
Join Date: Aug 2013
Location: Memphis
Posts: 1,616
Michigan
|
We recently got rid of our DOD decals as well but no emissions testing here thankfully
__________________
2019 Ram 3500 Limited w/ Max Tow pkg
2005 Cardinal 33LX
2014-3950, Full Paint, 17.5" tires, 370W solar, 3100W Magnum inverter w/ AGS, 7500w diesel generator, Micro-Air Easy Start 364 (x3) SOLD!
|
|
|
07-09-2015, 10:34 PM
|
#17
|
Senior Member
Join Date: Aug 2014
Location: Mead
Posts: 147
Washington
|
Quote:
Originally Posted by calewjohnson
STOP!!!!
You have a 2015 F350....you have 4 EGT probes already installed....look into an Edge CTS, it is not a tuner, but plugs into the OBD port... You can monitor a whole crap ton of information, plus you have a no kidding visual of when a regeneration cycle is actually occurring.
I currently monitor all 4 EGT sensors, coolant temp, transmission temp, DPF load, boost pressure, DEF %, amongst others. When regenerating, there is a flashing red R at the top of the screen...
Cale
|
OK boys....I have searched and searched on the 6.7L Dodge and cannot find any information regarding factory EGT. I too am going to purchase the Edge CTS and was going to install the probe, but if there is a factory probe already installed I'll just have to purchase the CTS and plug it in....any ideas?
__________________
2015 Voltage 3305
2007 Freightliner M2 Business Class
Happiness is an old pickup truck, a good dog and an understanding woman....
|
|
|
07-09-2015, 10:43 PM
|
#18
|
Senior Member
Join Date: May 2014
Location: Peyton
Posts: 96
Colorado
|
Ewacowboy, Your dodge will have pre and post dpf pyrometers (egt) installed if it is completely stock. The CTS will work just fine for your application aswell. I ran a cts on my stock 2011 cummins before and after doing deletes. You are good to go.
__________________
2014 Voltage V3605
2021 Ram 3500 CCLB DRW
|
|
|
07-09-2015, 11:08 PM
|
#19
|
Senior Member
Join Date: Aug 2014
Location: Mead
Posts: 147
Washington
|
Thanks! I think I'll order this weekend. Now I need to decide on the original CTS or the new CTS2....any experiences?
__________________
2015 Voltage 3305
2007 Freightliner M2 Business Class
Happiness is an old pickup truck, a good dog and an understanding woman....
|
|
|
07-09-2015, 11:11 PM
|
#20
|
Senior Member
Join Date: May 2014
Location: Peyton
Posts: 96
Colorado
|
I have the original, but if I were you I would go for the CTS2 unless you can get a heavy discount on the original .
__________________
__________________
2014 Voltage V3605
2021 Ram 3500 CCLB DRW
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|