Manufacturer
It is a Dutchman/whoever owns the conglomerate now!
Just set something under your ramp to hold it out flat from you trailer and measure from the top corners of door opening where you can attach cables to, down to the outside edge of the door and make sure 120" will not be too long.
The outer frame of the door is aluminum tubing, I set my trailer level, then the door level, hung the cables from the frame and then used them to mark where to put the brackets. Drill through the frame and put some grade 8 bolts through it. Dont clamp them down super tight, will just collapse the aluminum tubing.
If my ramp can hold my 1700 lb RZR going in and out of it, it will hold 3-4 adults on it no problem.
|