Good morning! I currently have a Coleman Lantern 334 BH. I love the camper, but recently my living room slide is off BADLY! I don't believe either side is functioning correctly. The back will pull all the way in, but won't go all the way out. The front will go all the way out and makes several "knocking" sounds, but won't come all the way in. It's almost like the room its self has shifted because the front wall will hit the ledge of the entertainment center, but the slide is not flush. Any help would be appreciated!
If you ever extended slide when you were not level, you may have slipped a gear tooth on one side or the other if you have a single motor. It's hard to tell without knowing brand or for of slide you have. They do get out of wack.
__________________
2015 Sierra 1500 Denali
2014 Coleman 249RB
David Jon Devoucoux
People, Places & Things...for over 40 Years!
1. Fully extend the slide room using the slide-out switch. Keep the switch engaged until the motors shut down on their own.
2. Retract the room 1-2 inches.
3. Repeat steps 1 and 2 until both motors shut down at the same time. In many cases, only two or three repetitions are necessary to synchronize the system.
4. Fully extend and retract the room. Always let the motors shut down on their own before releasing the switch.
Linear Mode
