Does anyone experience this
My fridge Norcold N621 is set to work on auto , when 110 is present it will for a days or 2, then it stops cooling. if I reset it for a few hours it starts to work again. also if I disconnect the AC it works on gas it drives me crazy anyone has any idea? Im scheduled to go on the road tomorrow and trying to avoid food spoilage.
Thanks.
I can't explain the work for 2 days then stop behavior. But when on auto, it is supposed to switch over to gas if you disconnect the AC. So in that respect, your unit is working as intended.
__________________
__________________
2012 Aspen Trail 2710BH | 280 watts of solar on the roof | 2x6V GC batteries | 100% LED lighting | 1500 & 300 watt PSW inverters | so far strictly boondocking
These refrigerators have cooling fans that attempt to cool the unit’s working innerds. I would check to see if that fan is running because the unit will shut down if it gets too hot back there. I have heard stories of folks adding fans back there to increase efficiency.
it is N621, actually I have the documentation , tried to send u a pic of the front page but it not upload . I left on a trip on Tuesday so far all is working well . perhaps it over heated , I was running it empty . crossing my fingers.
__________________
2012 Aspen Trail 2710BH | 280 watts of solar on the roof | 2x6V GC batteries | 100% LED lighting | 1500 & 300 watt PSW inverters | so far strictly boondocking