I just went from an F250 / Cyclone 3010 combo to a 2012 Ram 3500 DRW / Voltage 3600. The F250 required air bags as there was no getting away from it. My question is does anyone have this or a similar set up and did you need to add the air bags to the Ram 3500? I just got both and I am in the process of getting a hitch bought and installed so I haven't hooked it up yet. I would like to order the bags with the hitch if needed. Thank you in advance for your help.
With an '08 F250 pulling a Torque 321 I had a 3 to 4 inch sag and HAD to have airbags...
My F350 DRW only sagged an inch or two hooked up to the Voltage 3895. I didn't feel like the airbags were required but I added them anyhow.
Mike & Helen
2014 Voltage 3895 EPIC III
2013 Ford F350 CC DRW FX4
I had a 2" sag. Didnt want airbags so went with the Timbren System. Sag is eliminated with a more stable ride. Actuall had to lower the nose of trailer slightly for a level ride. Cost less than $200 and took me 20 minutes to install.