Pex Lines

[RVNevada]

Hi guys and gals,

asking for a little help, My RV is 4 hours away, does anyone know the size of our Pex lines in a 2015 Voltage 3895, I hope I don't have to drive there to check it out till Sept. 1....

[sundancer 87]

Originally Posted by RVNevada

Hi guys and gals,

asking for a little help, My RV is 4 hours away, does anyone know the size of our Pex lines in a 2015 Voltage 3895, I hope I don't have to drive there to check it out till Sept. 1....

More than likely they are 1/2" lines. A bag of 1/2" or 3/4" crimps aren't that expensive to have on hand.

[ATCguy]

DISCLAIMER:

Not sure about your 2015 model… but here are photos from the schematic of my 2013 Voltage 3200. One could hope, and probably assume that they use the same type & size… but we all know from experience that isn’t always true. So with that out of the way…

Contrary to the note highlighted in my 3rd photo stating that “all hose is 1/2 ID unless noted”… by matching up the Materials List (2nd photo) with the line run drawing (4th photo), it appears that ⅜ is used on my long-run pipes throughout the rig… with ½ inch only used between the intake & water pump, and again from the intake to the fresh water tank (final photo).

So again… take from this what you will. Good luck!

[RVNevada]

Thanks Tom,


That's the same info I came up with, so I guess the best thing to do is just go a take a look,



Thanks Again

[ATCguy]

Originally Posted by RVNevada

… so I guess the best thing to do is just go a take a look.

Or, just buy some of both to take with you. Unless there’s something else weird going on, you know it’s probably one of the 2.

[RVNevada]

LOL, no tom, going to place shut off valves at each location and water connection on right side