Help! On the road slide issue

[sundancer 87]

Originally Posted by arlan in arizona

This is a strange thing. While relocating my main slide controller because access to it was not possible with out removing the basement wall. I found an unused controller in the same location.

They had mounted the controller before installing the wet bay cabinet and was inaccessible because the wet bay was blocked the access.

I manage to get it removed with one of those little right angle screw drivers and a lot of talking to it.

I mounted it next to the recently relocated controller so I guess if have a spare.

I had forgotten all about it until this topic began.

Hot dang!! One for the good guys finally

[arlan in arizona]

Originally Posted by sundancer 87

Hot dang!! One for the good guys finally

I suppose.

You can see where one of the plugs on the "spare" is bent (but not broken) . It appears that they made an attempt to hook it up but failed.

In relocating the other I had to unplug wires and re-route them so they would be long enough to move it were I did.

Idiots.

[Thom]

Originally Posted by arlan in arizona

This is a strange thing. While relocating my main slide controller because access to it was not possible with out removing the basement wall. I found an unused controller in the same location.

They had mounted the controller before installing the wet bay cabinet and was inaccessible because the wet bay was blocked the access.

I manage to get it removed with one of those little right angle screw drivers and a lot of talking to it.

I mounted it next to the recently relocated controller so I guess if have a spare.

I had forgotten all about it until this topic began.

AWSOME! And I thought I was the lucky one when I found 3 extra 90* ABS fittings behind my wall.... guess I will pull it again and look up this time..

[Soccerloco]

Arlan why not try the lucky find spare controller see if it is a glitch on the existing controller[emoji108]

[arlan in arizona]

Originally Posted by Soccerloco

Arlan why not try the lucky find spare controller see if it is a glitch on the existing controller[emoji108]

I will try that when I cools down out here a little more.

[Soccerloco]

Totally understand. We are certainly looking forward to fall!!

[DesertRat]

Originally Posted by dougs2

No, each slide has it's own controller. The bedroom slide controller is in the front compartment above the hydraulic pump. The other 2 are in the storage compartment just inside each door, mounted on the ceiling, on my 3605 anyway.

I don't have a hyd. pump but I did mount a inverter on the ceiling in the front compartment. Guess I looked right at the controller & forgot about it.

[calewjohnson]

Glad I gave this slide a read through... My main slide, with the couch, hiccuped on the final leg of our trip. I got to looking at the way it mates to the wall, which allows for some flexing and the guide shoe to slide out at the motor. Long story short, I have a bunch of broken screw heads, which is letting the wall flex, they are #10x1.5, I am going to pull the slide part ways in tomorrow to reset the shoe, and replace all the screws with #14x1.5 screws with 3/8 heads. I will follow your reset procedure instead of running in/out several times. I believe this will fix my problem. I will start another thread when completed with results.

Cale

[Soccerloco]

Keep us posted on results!