Plastic Belly Plate Cracked

[franktafl]

Originally Posted by Bamoou

Thanks everyone. I really like the eternabond idea but there is nothing to press against. I've had some pretty weird ideas but are not practical. I have laced it together with some tie wraps now I just have to coverup to gap.

Al

as soon as the air gets under those, it will rip them off. Best to cover them with something. Eternabond won't work but have you thought about fastening a piece of 1 by ? to the frame and then attaching the chloroplast to that?

[drogers]

I cut my underbelly into two separate pieces and put in an access door (cut on three sides) for the slide motor, two years ago when I was replacing my black and gray tank valves, I also put in access doors for each valve. I sealed it all up with 4" black gorilla tape. It has lasted the past two years driving in southern Ontario Canada, during rain and storage outside for the winter. I have never had to touch the Gorilla tape since.

[videoarizona]

I'm another fan of the wide, thick, black Gorilla tape. Been on my underbelly for over a year. Despite the Arizona heat, it is just as strong as the day I put it on. Anyone who has had problems with that stuff didn't clean the area properly.
BTW, I used Eternabond on the roof... And it's lasting as well.
From now on its Eterna up high and Gorilla Black down low for this kid.