Slide Screws

[Camper2b]

Originally Posted by calewjohnson

A good source of water intrusion is behind the corner plate on the bottom of the slide, there was ver little caulk and a hole to the inside of the slide, with signs of water entry. Checked everything, I can guarantee no water entry now....I will do the other side tomorrow. Sorry, no pics today, as I was rushing to beat darkness.

Cale

I did the same thing with screws. But I went with original size. Not sure I understand the corner plate your describing ? Pics when you can, thanks.

[calewjohnson]

Originally Posted by Camper2b

I did the same thing with screws. But I went with original size. Not sure I understand the corner plate your describing ? Pics when you can, thanks.

Went out this morning and pulled the other side off, then cleaned and caulked the whole bottom. Here are the pics of the corner and the back, the second picture where there is a space with no caulk is a good candidate for water intrusion. That hole goes into the slide, also look at the third pic, that is the back...






Taped and caulked:



Cale

[Camper2b]

Got it, thanks.