2014 3605 Voltage Changes

[Bsfunk]

Voltage change's, Add's already

Fixed 6 point auto leveler that did not work since day one
Fixed amplifier behind Fire place
Installed pipe hanger on washer drain pipe behind Fire place
Added light switch in garage half bath room
Removed 4" sewage pipe holder and replaced with 6" pipe ( my sewage pipe did not fit in existing 4" pipe under trailer
Redone Sony radio/ DVD wiring
Added wireless Camera to back of trailer
Retaped A/C duct work



Still working on it.

[Camper2b]

Originally Posted by Bsfunk

Voltage change's, Add's already

Fixed 6 point auto leveler that did not work since day one
Fixed amplifier behind Fire place
Installed pipe hanger on washer drain pipe behind Fire place
Added light switch in garage half bath room
Removed 4" sewage pipe holder and replaced with 6" pipe ( my sewage pipe did not fit in existing 4" pipe under trailer
Redone Sony radio/ DVD wiring
Added wireless Camera to back of trailer
Retaped A/C duct work



Still working on it.

Is that all! . Seriously, my Sony radio/dvd isn't working right either. It won't play movies right. I see the picture fine but no audio. No matter how I set the settings still no audio. Now, if I put in an old movie on dvd like a John Wayne thats been converted it all works. But forget the new movies. I pulled the radio out and it was wires galore didn't feel like messin with it and stuck it back in. Radio works fine.... but it should all work. Any advise on fix would be appreciated.
Thanks

[Bsfunk]

Hey Slim

You are correct and saying a tone of wires and what a rats nest! I went threw that mess and cleaned it up,There were a couple on input coax cables that were switch. It works fine now that I had to fight for 3 weeks to get a remote that should have came with the Voltage when I bought it. Had to cut some of the panel out behind the radio,do to I could not put the radio back in straight.

[Camper2b]

Originally Posted by Bsfunk

Hey Slim

You are correct and saying a tone of wires and what a rats nest! I went threw that mess and cleaned it up,There were a couple on input coax cables that were switch. It works fine now that I had to fight for 3 weeks to get a remote that should have came with the Voltage when I bought it. Had to cut some of the panel out behind the radio,do to I could not put the radio back in straight.

Thanks, I'll get back in there one day...