Quote:
Originally Posted by ymurf
I went to hook up my camper today and noticed only one side of my landing gear was lifting. Side nearest the motor wont go up or down. Any ideas?
|
Dealt with this issue continously on my Denahli. Inside the top of the square landing gear tube under the worm gear there is a roll pin that holds the beveled gear on top of the inner square tube. This pin would always shear on my gear because it carries the weight of the entire assembly, my 2 miles of washboard dirt road were tough on that gear and roll pins.
The side with the motor is harder to get into to replace that roll pin but it is do-able. Stay hitched up to support the weight and you have to remove the motor but you can do it.
__________________