I have a 2017 Voltage 3605. My brake away pin got pulled and the switch and the wires started smoking . I disconnected the battery and replaced the switch, I pulled the pin on the new one to make sure I had 12 volts coming out of the switch , after a few seconds the new switch started smoking, I replaced the pin and the switch cooled down. Is anyone else having the same problem. Thanks Denny
That's my though also , The switch only transfers 12 volts from the battery to the brakes and should not get hot and start smoking . I have an appointment with the Dealer. Thanks Denny
Easiest way to check is with a magnetic compass, if there is power the compass needle will move when you get close to the hub assy..
If it does not move then there is no power.
__________________
__________________
Roy & Mary Fralick and our 5 camping Chihuahuas, Gypsy, Sammy, Delilah, Pebbles and Mitzi