Has anyone installed a Gen-turi on the Voltage Unit? I tried the support brackets with double side tape that came with the unit(Gen-Turi) but they would not stay attached. I did clean surface with Wax & Grease Remover (DuPont 3812). Will the rivets that came with the unit hold to the siding?
I think I would try those cable tie mounts that the telephone people attach cables and pipes to a wall with. They are about a 1" square plastic tabs with double sided tape mounted on the back. On the top side they have a harness that you can feed a cable tie through to hold everything in place. If you need to remove later you can pry off the plastic and remove the glue with Goo Gone or my favourite Isopropyl Alcohol. Here's a picture Wire-Tie Mounts (10-Pack) : Tie Mounts | RadioShack.com
Note: I would also use the Isopropryl Alcohol to clean before installing the mounts. Test first in an area which can't be seen in case it removes paint or decals.
__________________
"We were not placed on this earth to see through one another, but rather to see one another through!"
I think I would try those cable tie mounts that the telephone people attach cables and pipes to a wall with. They are about a 1" square plastic tabs with double sided tape mounted on the back. On the top side they have a harness that you can feed a cable tie through to hold everything in place. If you need to remove later you can pry off the plastic and remove the glue with Goo Gone or my favourite Isopropyl Alcohol. Here's a picture Wire-Tie Mounts (10-Pack) : Tie Mounts | RadioShack.com
Note: I would also use the Isopropryl Alcohol to clean before installing the mounts. Test first in an area which can't be seen in case it removes paint or decals.
how about the heavy duty industrial grade velcro stuff.
__________________
Rick and Debbie & Ted E. Bear too
SUMMER MICHIGANDERS/WINTER TEXANS
INSTEAD OF GUEST TO OUR FORUM, REGISTER AND BECOME A MEMBER. COST IS FREE! YOUR INSIGHT, IDEAS AND PROBLEMS: PRICELESS!!]
I was parked next to a coach tailgating last year that used a metallic dyer vent hose. He just slid one end over the tail pipe and clamped the other to the top of his slide. Seemed to work OK?
__________________
Mike & Helen
2014 Voltage 3895 EPIC III
2013 Ford F350 CC DRW FX4
Do those of you with the gen-turi see results in less noise???
When we have our generator on - it is extremely noisy inside the coach. We would not be able to watch tv or sleep while it was on! Of course Dutchmen said it is "within normal"! Whatever the HXXX that means!
__________________
Kathy & Leo ~Adirondack Mtn. Region of NY
2013 Rubicon 2900 Toy hauler
2010 Ford F-350 4x4 Lariat Dually Super Crew Diesel
I'm surprised. Our generator, an Onan 5500, is very quiet. With it running directly under the bed, you can barely hear it. We have no trouble talking, watching TV or sleeping.
Do those of you with the gen-turi see results in less noise???
When we have our generator on - it is extremely noisy inside the coach. We would not be able to watch tv or sleep while it was on! Of course Dutchmen said it is "within normal"! Whatever the HXXX that means!
Funny thing, i slept in the backend of many C-130s with no problem. Now the noise of the generator running below our bed makes it tuff for me too sleep. Before heading to Balloon Fiesta last year several of us invested in the Gen-turi with the intent of eliminating fumes since we would be sitting outside alot, and reducing noise. It did infact eliminate the fumes. I also noticed it was slightly quiter from outside, but did not notice much of a difference from inside.
__________________
Mark & Dee
2013 Voltage 3895
2011 Dodge 3500 Dually
2 HDs & Can-Am Two up