Bulbs

lcv800 · 12-12-2015, 12:30 PM

JC10 LED is the replacement for the puck light bulbs in the Voltage's right? I used the cool chart that someone posted (I forgot) and it seems that it is correct. Just want to make sure before I drop the bucks.
Thanks,
Rusty

VCToyhauler · 02-12-2016, 02:11 AM

Hi Rusty - did you get the bulbs? How many watts saved going the halogens to the LEDs? Please send the amazon link or something.. I think my lights are my biggest user!

WMac · 02-12-2016, 02:26 AM

VCToyhauler

These are what your looking for and the ones i used to change every bulb. The puck lights use the G4 style while the dual plactic lights in the garage use the T10 Wedge style
10pcs Warm White Car RV T10 Wedge 42 SMD 921 194 168 High Mount Stop LED Lights | eBay

4X Car G4 9 LED 5050 SMD 120LM Warm White Cabinet RV Boat Light Bulb Lamp DC 12V | eBay

WMac · 02-12-2016, 02:28 AM

They also come in cool white which i dislike as it makes the interior feel like your in a stadium instead of warm and inviting.

VCToyhauler · 02-12-2016, 03:47 AM

Thanks wmac! I get most of my stuff from amazon, so would these be the same?
Triangle Bulbs (6-PACK) 2.6-Watt G4 LED Bulb 12V AC/DC, 13 SMD 5050 LED, 2.6W Warm White Color (Jc10 Bi-pin 10w Replacement) https://www.amazon.com/dp/B00CWKTOM6..._ziwVwbHQRQ2Y6

ATCguy · 02-12-2016, 04:21 AM

Here's that chart again, if anyone needs a reference...

Firstime RVer · 02-12-2016, 03:55 PM

This may be a dumb question but I have to ask.. How do you remove the cover from the puck lights?? I tried twisting them, like unscrewing it but didn't want to apply too much force. I'm also afraid to pry on them for fear of breaking the cover..

Thanks

ATCguy · 02-12-2016, 04:31 PM

Yep, they're stubborn... but they do twist off. It's a peg-in-notch thing, and it only needs about 10-degrees of counter-clockwise turn to come loose.

Firstime RVer · 02-12-2016, 08:00 PM

Thanks.. No instructions for this kind of thing came with the trailer...
Pat

WMac · 02-12-2016, 09:22 PM

Quote:

Originally Posted by VCToyhauler

Thanks wmac! I get most of my stuff from amazon, so would these be the same?
Triangle Bulbs (6-PACK) 2.6-Watt G4 LED Bulb 12V AC/DC, 13 SMD 5050 LED, 2.6W Warm White Color (Jc10 Bi-pin 10w Replacement) https://www.amazon.com/dp/B00CWKTOM6..._ziwVwbHQRQ2Y6

Yes, That would be them.

WMac · 02-12-2016, 09:29 PM

Quote:

Originally Posted by Firstime RVer

This may be a dumb question but I have to ask.. How do you remove the cover from the puck lights?? I tried twisting them, like unscrewing it but didn't want to apply too much force. I'm also afraid to pry on them for fear of breaking the cover..

Thanks

They really don't need to twist to come out, but by hand its the only way to get them off. I had an issue with one of mine while I was doing the PDI and the service tech went and got a "Plastic Putty Knife" and pushed it between the base and the lens and pulled down and it popped right out. I now own a 6 pack of them i purchased from home depot.

Firstime RVer · 02-12-2016, 11:35 PM

Thanks, I'll take pictures

Nana & Poppy · 02-13-2016, 10:42 PM

Quote:

Originally Posted by ATCguy

Yep, they're stubborn... but they do twist off. It's a peg-in-notch thing, and it only needs about 10-degrees of counter-clockwise turn to come loose.

On the Rubicon, we have to pry it down......at least that is what I got told by the factory!

Springerdad · 02-16-2016, 04:48 PM

If these are the same design as the ones in our Denali, they are indeed a muther to twist off. Ours are all led array, on an aluminum base. Some are switched, some are not. The switched ones have a design flaw,,,, push too hard on the button and the little plunger slips off the internal switch. Then you have to remove the cover to reset things. I found by carefully trimming 1/8 inch off the plunger in the cover, it fixes the problem. Aside from that, they're great lights and we do like them.

You may also like: