So the manual hydraulic portion of the motor doesn't work (either), so i am attempting to locate the bolt to manually draw the slide-out in the out position.
*I found one post where a Dutchmen owner located the bolt however, he said the bolt was literally covered by the camper with no access hole.
I have a 1996 Dutchmen 310 Classic 32'
Please help if you know what i can try, like i said the motor AND the manual hydraulic portion (on the motor) will not work.
If it's a schwintek slide I read where someone had to cut a hole to remove set screw .
To remove the motor the set screw has to be removed if the slide can't be opened. However, the first post in the thread alluded to a juice mechanism did it not?
__________________
2013 Voltage 3800, 2012 Chevy 3500 HD
2010 Yamaha V Star 950
2009 Yamaha Raider
Volunteering with Habitat for Humanity Caravanners
A little more info please. When you say the motor and manual option don't work, what do you mean? Can you hear the motor trying to operate? When you try the manual over ride can you turn the motor? Do you have any fluid leaks under the trailer? Get back to us and we'll try and put our heads together.
__________________
Jeff
"All fisherman are liars, except you and me, and I'm beginning to wonder about you.
To remove the motor the set screw has to be removed if the slide can't be opened. However, the first post in the thread alluded to a juice mechanism did it not?
Your right it do! I need to move this photo over to a schwintek thread.
__________________
Slim
Former 2014 Vlotage 3200 owner
So....I never did locate ANY maual override however, I climbed under the motor assembly and the wire to the slide out switch was cut! Fixed the wire and the motor fired right up!!! Could not believe it. Thanks for the assistance, im still worried if motor goes out about no way to crank it back out but I will take what I got for now!