Slide issues - Page 2 - Dutchmen Owners

Go Back   Dutchmen Owners > Dutchmen Brand RVs > Toy Hauler
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 06-30-2019, 11:59 AM   #11
Member
 
Join Date: May 2019
Location: Hays
Posts: 30
Kansas
Got it figured out
I had a broken spring awhile back and the tire rubbed several wires bare . Replaces the damaged wires and all is good.
Also I did a google search for schwintek troubleshooting guide and found a pretty good manual. I printed it off and put in in camper.
Thanks for all the help
__________________

Jeffro is offline   Reply With Quote
Old 07-09-2019, 02:34 PM   #12
Senior Member
 
Join Date: Nov 2017
Location: Lakeville
Posts: 60
Alabama
Jeffo, if you need to get to the motor next to the sliding door you can take off the trim on that side of the slide room. It is pin nailed onto the backer board which is screwed into the slide box framing and is a whole lot easier than removing the door.
__________________

Revere411 is offline   Reply With Quote
Old 07-10-2019, 09:50 PM   #13
New Member
 
Join Date: Jun 2018
Location: Spicewood
Posts: 5
Texas
If you look up under the fender well they run the wire exposed back to the rear motor slide. I had a flat tire that shredded that wire. I ran the wire the best I could in a better location and so far have not had that happen again. Possibly the wire got chewed on by a critter.
captwrk3 is offline   Reply With Quote
Old 07-11-2019, 03:14 AM   #14
Member
 
Join Date: May 2019
Location: Hays
Posts: 30
Kansas
Quote:
Originally Posted by Revere411 View Post
Jeffo, if you need to get to the motor next to the sliding door you can take off the trim on that side of the slide room. It is pin nailed onto the backer board which is screwed into the slide box framing and is a whole lot easier than removing the door.
Are you talking about the decorative trim on the face of the slide?
Jeffro is offline   Reply With Quote
Old 07-12-2019, 11:57 PM   #15
Senior Member
 
Join Date: Nov 2017
Location: Lakeville
Posts: 60
Alabama
Quote:
Originally Posted by Jeffro View Post
Are you talking about the decorative trim on the face of the slide?
Yes, the decorative trim is pin nailed on. Get a flat bar and carefully pry the pretty stuff off and then unscrew the base board. Pull the pin nails through the back using a pair of pliers or side cutters. Also you can wiggle them back and forth and the will break off so that you have a flat surface again.
Revere411 is offline   Reply With Quote
Old 07-13-2019, 01:18 AM   #16
Member
 
Join Date: May 2019
Location: Hays
Posts: 30
Kansas
Quote:
Originally Posted by Revere411 View Post
Yes, the decorative trim is pin nailed on. Get a flat bar and carefully pry the pretty stuff off and then unscrew the base board. Pull the pin nails through the back using a pair of pliers or side cutters. Also you can wiggle them back and forth and the will break off so that you have a flat surface again.
Got it thank you. Good info.
__________________

Jeffro is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Dutchmen RV or any of its affiliates. This is an independent, unofficial site.



All times are GMT. The time now is 01:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2012 Social Knowledge, LLC All Rights Reserved.