For all Moders.
I have done plenty of Mods and have got allot of help from this forum. The Mod I have in mind has got me a little stumped on what to do.
A while back I installed some awesome LED Flood backup lights on the back of my 2017 Coleman 300tq.
I now want to use the same lights and use them rear floods for loading and off loading at night.
I want to put them here between the clearance lights.
The problem is access. Inside the garage of the Toy Hauler I would tap into the little led puck light for a power source. I would put a wall switch on the ramp wall. (that's not the ceiling but the bottom of the electric drop down bed)
I would travel up the ramp wall to the ceiling where I would tap into the flood lights. As you can see looking up the wall to the ceiling there is just no access.
I figure I got three choices.
1. Cut an opening to gain access next to the ramp and hope to gain access to the flood light location. Would cover inspection hole with a small piece of decorative diamond plate.
2. Use surface mounted wiring hardware and put everything on the outside of the wall?
3. Forget the whole thing!
Any input would be appreciated.