I got a double wall switch assembly at CW and mounted it on the wall on the kitchen side. Since they are not three ways, I simply wired them in parallel, one for the pendant lights switch, and one for the overheads on the kitchen side. Side note, when I pulled the control panel to do the job, I had to feed the wires up from the bottom since there was a huge amount of strain on the bundle. I also discovered many of the crimps on the spade connectors were loose and wires ready to pull out. even the power jumpers that had no strain on them were loose. That repair took quite a while to correct since working space was limited on the back of the switch panel. I was amazed that the crimps were nearly non existent, poor craftsmanship at its worst.
__________________
2015 Voltage 3305, Gone for Good !
2014 Ram 3500 dually, Aisin, Gone but not Forgotten.
2018 Winnebago Sunstar 32YE
|