LCI LevelUp + Linc Remote?

[dinostop]

Does anyone have the part number of the wireless control box for the levelup? Lippert quoted me over $600.00 for just the Controller box. Thank you!

[hddecker]

Welcome to the forum.

Sorry I can't help you, but I'm sure someone who can will be along shortly.

[dinostop]

My controller is in my front storage compartment by my landing gear with the hydraulic pump and and hoses. I am not looking for the multi-function control board as I know where that is. (if that is what you are looking for I have a trick to find it).

[VCToyhauler]

I'll post pics of both. My multifunction receiver is in the passenger side passthru on the top near the vac bag access. My levelup remote is on the top of the front (gen) compartment on the left side near the bat kill switch (which in my case is now an a/b bank select) and also part numbers when i get home. Right now we're in Cinder Hills OHV near Sunset Crater east of Flagstaff. Awesome ATV riding on pulverized lava. Rides like sand with pine trees all around at 7k elevation, and a very cool place to camp!

[WMac]

Originally Posted by dinostop

My controller is in my front storage compartment by my landing gear with the hydraulic pump and and hoses. I am not looking for the multi-function control board as I know where that is. (if that is what you are looking for I have a trick to find it).

So whats the "trick" to finding it.

[WMac]

Originally Posted by VCToyhauler

I'll post pics of both. My multifunction receiver is in the passenger side passthru on the top near the vac bag access. My levelup remote is on the top of the front (gen) compartment on the left side near the bat kill switch (which in my case is now an a/b bank select) and also part numbers when i get home. Right now we're in Cinder Hills OHV near Sunset Crater east of Flagstaff. Awesome ATV riding on pulverized lava. Rides like sand with pine trees all around at 7k elevation, and a very cool place to camp!

I appreciate that.

Cinder Hills sounds like a great place to ride. We just got our new XP 1000 highlifter and cant wait to get it out and ride,

[VCToyhauler]

Take 89 North from Flagstaff towards Sunset Crater, and its on the right... Not too far out of town, but the only trick is not missing it since it comes up quickly. Great place to ride but it does get soft, so don't get too far off the main road to camp and it rides a bit like sand, so just take care not to get stuck in the beautiful stuff!

[WMac]

Originally Posted by VCToyhauler

I'll post pics of both. My multifunction receiver is in the passenger side passthru on the top near the vac bag access. My levelup remote is on the top of the front (gen) compartment on the left side near the bat kill switch

If you get a chance can you post those pics. Thanks.

[donzinger]

Bump. Would like to see these as well

Sent from my SM-G920V using Tapatalk

[VCToyhauler]

Sorry for the delay guys.. Have not forgotten.. Planning to take and send next week.

[VCToyhauler]

Here they are - the levelup controller is in the front compartment, above the generator, and the multifunction controler is in the tool compartment on the passenger side, just above and outside of where the vacuum cleaner bag door opening is. Please let me know if anything else is still needed.

[donzinger]

Originally Posted by VCToyhauler

Here they are - the levelup controller is in the front compartment, above the generator, and the multifunction controler is in the tool compartment on the passenger side, just above and outside of where the vacuum cleaner bag door opening is. Please let me know if anything else is still needed.

Interesting how these vary so much. My multifunction controller is in front compartment above the batteries.

[donzinger]

Originally Posted by VCToyhauler

See page 15 at: http://lci1.com/assets/content/suppo...ket_Manual.pdf

Is yours hydraulic? The pic on the cover of this manual is for the electric Ground Control version.

[VCToyhauler]

Yes mine is Hydraulic

[donzinger]

Originally Posted by VCToyhauler

Yes mine is Hydraulic

Wow. I'll have to get the number off mine. My remote doesn't have the leveling option on it either that I found

[VCToyhauler]

Going by memory, but i think my remote may not have had the leveling applet either, and i had to add that, which you can do once you get into its config menu, so you may be able to do the same. There i found other applets like generator too, and added that, but of course that doesn't work unless you have an onan interface... I'll check into that further too someday.

[donzinger]

Got them all added, now have to reconfigure it by fuse positions. For example, right now the awning buttons control the galley slide and the main slide buttons control the bedroom slide. That could be interesting after a few bourbons around the fire!

Sent from my SM-G920V using Tapatalk

[VCToyhauler]

Originally Posted by donzinger

Got them all added, now have to reconfigure it by fuse positions. For example, right now the awning buttons control the galley slide and the main slide buttons control the bedroom slide. That could be interesting after a few bourbons around the fire!

Sent from my SM-G920V using Tapatalk

I can’t believe they want $250 for a new Linc remote!! And I can’t believe mine died today!

[donzinger]

Originally Posted by VCToyhauler

I can’t believe they want $250 for a new Linc remote!! And I can’t believe mine died today!

Oh no. That's mo fun at all

[franktafl]

could it be that it lost connection to the board and needs reset somehow?