DC fuse labels in V3305

[ewacowboy]

I was looking at my fuse box today and determined the person that installed my DC fuse box has horrible hand writing!

I am going to make some new labels for the fuse box but I can't seem to read some of the current labels. Here is what I have so far:
1-Happy Jack
2-
3- Kitchen
4- Living Room
5 - Bathroom
6 - Bedroom
7 - Water pump
8 -
9 - Slide
10 - Slide
11 - Slide
12 - Garage
13 - Step (lights??)
14 -

Do these sound correct? Anyone have any suggestions?

[wahoonc]

At least yours got labeled... mine are labeled 1, 2, 3...

Turn everything in the trailer on, then pull the fuses one by one and see what quits working. In my case I pulled a one fuse and the a couple of the lights go out, pull another one and they come back on dim.

Aaron

[Aztex]

I have a 3970 and I agree that the labeling of the 12 volt panel is almost illegible.
From what I can tell on mine, they are as follows:
1 Happy Jack
2 Furnace
3 Kitchen
4 Living Room
5 Bathroom
6 Bedroom
7 Water Pump
8 Accessories (don't know what that is)
9 Slide
10 Slide
11 Slide ( i would imagine that is what it is, I can only get the S)
12 Garage
13 Garage
14 Step
15 Fuel Station

I have 15 fuses, with 2 in the garage.

I hope this helps a little.

CJ

[ewacowboy]

Thanks CJ....that gives me a place to start!