With over 1800 ideas you are sure able to find some ideas for now or later, I know I did, I marked ad flded pages down and now will put them to paper shouldbe enought to get the "making it my own" fever filled up..
__________________
Roy & Mary Fralick and our 5 camping Chihuahuas, Gypsy, Sammy, Delilah, Pebbles and Mitzi
On our 2013 3950 the overhead recessed lights in the main slide and the wall sconce lights are all switched together. Meaning you can never have just the sconce lights on without the over head lights on, whats the point of the sconce lights then?
The sconce light have switches on them already. I found an unswitched 12v power wire bundled with all the wires that go to the slide out bundle. You just have to unwire the sconce wire from the overhead lights and then connect them to the new 12v power wire. Now we can turn on one or both scones without the 5 overhead beacons shining down on us.
I'm assuming you had to remove the sconce from the wall to get at the wiring. It appears the shade has to be removed to get at the screws, but I can't figure out how to remove them. How did you accomplish that?
__________________
2016 Voltage 3200
2015 Silverado 3500HD SRW CC
2014 Harley Davidson FLHTK
I'm assuming you had to remove the sconce from the wall to get at the wiring. It appears the shade has to be removed to get at the screws, but I can't figure out how to remove them. How did you accomplish that?
No you don't have to remove the light fixtures themselves. There's a hole in each corner of the slide where wires go up the sconces go up both of those the power feed on my 3950 only goes up the rear were most hole. That's how you can tell which wire's feed the sconces. Unwrap the wire bundle that connects those two holes and you can see where all the connections are.
[/URL][/IMG]
Linear Mode
